Materials and protection standards in our motorcycle gear
Leather, textiles, armour and EN 17092 classes explained plainly, plus which of our products are tested and which documents we hold. Request a quote.
Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. This page explains the materials we work with and the protection standards buyers ask about most: EN 17092 for garments, EN 1621 for armour and EN 13594 for gloves. It also says plainly what we have tested and what we have not.
Leathers compared
Leather choice decides abrasion resistance, weight, comfort and cost. This is a general comparison, not a product claim.
What we work with: cowhide, kangaroo, buffalo and goatskin. Ask us which hide suits the product you have in mind.
| Leather | Strengths | Trade-offs | Typical use |
|---|---|---|---|
| Cowhide | Hard-wearing, widely available, repairable | Heavier than kangaroo | Suits, jackets, gloves, vests |
| Kangaroo | Light and strong for its weight | Usually higher price | Race suits, glove palms |
| Goatskin | Soft, light, close feel | Thinner, wears faster in the palm | Gloves |
| Buffalo | Dense, thick, rugged look | Heavy, stiff | Cruiser jackets, vests |
Choosing a leather by use

The four swatches show cowhide, kangaroo, buffalo and goatskin, with the cut edges turned up so you can see how thick each one is. Thickness is the first thing buyers notice, and the one a photo hides.
- Cowhide: suits, jackets, gloves and vests. Our cowhide for suits and jackets is 1.2–1.4 mm. The safe default when you want wear and value.
- Kangaroo: race suits and glove palms, where weight matters. Expect a higher price.
- Buffalo: cruiser jackets and club vests. Dense and rugged, but heavy and slow to soften.
- Goatskin: gloves. Soft with a close feel, at the cost of a thinner skin.
Pick by the rider first and the look second. A touring jacket in buffalo will look good in the shop and feel heavy on a hot day. If you are unsure, ask for a swatch of the two hides you are choosing between.
Thickness and finishes
Leather thickness is measured in millimetres. Thicker leather generally resists abrasion for longer but is heavier and stiffer. A range of roughly 1.2 to 1.4 mm is commonly quoted for cowhide in protective garments, and that is the range we use for cowhide race suits and jackets. Where a suit or jacket uses a thinner leather in low-wear zones, we say so.
Finishes: smooth, aniline, distressed, perforated and printed or embossed. Ask us which finishes are available for the leather you choose. Perforation improves airflow in hot weather. It is placed away from the highest-wear zones. For a longer comparison of two common hides, see our guide to kangaroo vs cowhide for race suits.
Where materials meet construction

The back of this two-piece race suit shows how several materials share one garment: leather for the shell, a speed hump behind the shoulders, and stretch panels where the rider bends. Materials are only part of what decides how a suit performs. Panel layout, seam placement and how the armour sits matter just as much.
That is why a leather name alone does not tell you a class. Two suits in the same cowhide, cut differently, can test differently.
Which material goes where
The picture shows a rider in a race suit, with the protective parts lifted off where they sit. Leather covers the high-wear zones; the numbered parts are where other materials and armour come in:
- Speed hump behind the helmet, for airflow and neck support
- Shoulder slider, a hard cap on the outer shoulder
- Shoulder armour in a pocket at the shoulder
- Back protector
- Elbow armour
- Elbow slider, replaceable
- Hip protector
- Extra layer of leather on high-wear zones such as the outer thigh
- Knee armour
- Knee slider, replaceable, on the outside of the knee

Textiles, linings and hardware
Not every panel is leather. Textiles go where movement, airflow or comfort matter more.
- Cordura and similar abrasion-resistant fabrics for low-impact zones.
- Stretch panels at the back, elbows, knees and sides, so a suit moves with the rider.
- Mesh and moisture-wicking linings for ventilation.
Ask us which textiles and linings are available for your product.
Zips, snaps and fasteners are common failure points. Ask us about zip and fastener brands when you request a quote. Custom pullers and trims in your branding are possible.
Armour: EN 1621-1 and EN 1621-2
Armour is tested separately from the garment it sits in.
- EN 1621-1 covers motorcycle impact protectors for limbs and joints: shoulders, elbows, hips, knees and shins.
- EN 1621-2 covers back protectors.
- Both standards use Level 1 and Level 2. The level reflects how much impact force passes through the protector to the body in the test. Level 2 allows less transmitted force than Level 1, and may come with more weight or restriction.
A garment can have armour pockets without armour being fitted, and armour can be certified without the garment being rated. Both facts should be on the label or in the paperwork.
The armour we fit is CE-marked to EN 1621-1 (limb and joint protectors) and EN 1621-2 (back protectors), Level 1 as standard and Level 2 on request. Certificate details are available on request.
What armour goes where

A full set has five parts, shown here laid out: shoulder, elbow, knee, hip and back. Each has a different job and a different shape.
- Shoulder and elbow: worn in pockets at the joint. They need to stay on the joint when the arm bends.
- Knee: sits below the kneecap in trousers or suits. Hard cap or flexible foam, depending on use.
- Hip: often left out of jackets and cheaper trousers, and it is worth asking for.
- Back: a larger protector under EN 1621-2. A jacket without a back pocket can usually take an insert, but say so before the pattern is cut.
Level 1 or Level 2? We fit Level 1 as standard and Level 2 on request. Level 2 lets less force through in the test. It is usually thicker and stiffer, which suits track and long-distance riders more than city commuters. Choose by how the garment will be ridden.
EN 17092: garment classes
EN 17092 is the European standard for motorcycle riders' protective clothing. It replaces the older EN 13595 and applies to garments for non-professional riders. It tests how a garment performs in abrasion, seam strength and tear strength, and sets classes by the level of protection. The full explanation is in our guide What is EN 17092?.
Three things to know when you compare garments:
- The class belongs to a specific, tested garment. It is not a property of "leather". A different cut or leather can give a different result.
- Higher is not always better for the rider. A lighter class suits some uses better, and a heavier suit can be worse in hot weather.
- Selling PPE has legal requirements. In the EU and UK, protective clothing sold to riders must meet PPE rules for that market. In the EU it goes through an examination by a notified body. Check requirements with your adviser before you list.
Class B and class C are easy to misread. B is a garment with the abrasion requirements of A, sold without protectors. C is a carrier for protectors, such as an armoured under-layer, and makes no abrasion claim.
| Class | Meaning in plain words |
|---|---|
| AAA | Highest protection, for the highest-risk riding. More weight and heat. |
| AA | Second highest. Covers the widest range of riding. |
| A | Third level. Lightest and least restrictive. |
| B | Same abrasion requirements as class A, but no impact protectors. |
| C | Holds impact protectors in place. Not abrasion tested. |
What we have tested, and what we do not claim
What we hold
- EN 17092 garment test report: one race suit, class AAA. Certificate details are available on request.
- Armour: CE-marked to EN 1621-1 and EN 1621-2, Level 1 as standard and Level 2 on request. Certificate details are available on request.
- Company certificates: ISO 9001, BSCI / amfori, Sedex / SMETA and WRAP. Certificate details are available on request.
- Gloves (EN 13594): we do not state a rating for our gloves.
If you need a class for your market, you can plan testing on an approved sample before bulk production. Ask us how it would be arranged for your product. Plan the time into your schedule, because testing happens after the sample is approved and before bulk starts. See how we work.
Choosing materials for your product
The right mix depends on how the garment will be used and sold.
- Track and race suits: kangaroo or cowhide, stretch panels at the joints, perforation where heat builds up, and armour placed for a tucked riding position. See custom race suits.
- Road and touring jackets: cowhide with textile panels and linings for comfort, and armour pockets for removable protectors. See custom motorcycle jackets.
- Cruiser and club wear: heavier cowhide, simpler construction and branding that holds up, such as leather patches and embroidery.
- Gloves: leather chosen for feel and abrasion resistance, with palm and knuckle protection where the design needs it. See custom motorcycle gloves.
Tell us the use, the market and the price you aim for. We recommend a build and tell you what each choice changes. We do not claim a material is "best". We say what it is good at and what it costs you in weight, comfort or price.
Documents we can supply
Buyers in the EU and UK often ask for paperwork before they list a product. We provide what we hold, as listed above: the armour certificates, the race suit test report and our company certificates. Ask for the current set when you request a quote, so it can be matched to your product and your market.
Looking after leather gear

Leather lasts for years if it is not abused. The advice is plain.
- Cleaning: wipe off dirt and insects with a damp cloth, then use a leather-safe cleaner on marks. Do not soak the garment or use household cleaners.
- Conditioning: apply a thin coat with a soft cloth, as in the photo, and let it absorb. Two or three times a year is enough for regular riders. Too much conditioner leaves leather soft and tacky.
- After rain: shake off water, hang on a wide hanger and let it dry slowly at room temperature. Heaters and hairdryers dry leather out and make it crack.
- Storage: a wide hanger in a cool, dry place, in a breathable bag. Do not store it folded or in plastic.
Test any new product on a hidden spot first. We can include care instructions on a label or card in your brand.
Frequently asked questions
What does EN 17092 AAA mean?
AAA is the highest of the EN 17092 classes. It means a specific garment passed the standard's tests at the highest level. It says nothing about other garments.
Is kangaroo leather stronger than cowhide?
Per unit of thickness, kangaroo leather is generally stronger, which allows a thinner and lighter garment. The result in a garment depends on thickness, finish and construction.
Are your jackets CE approved?
We do not use that phrase for whole garments. Armour can be CE marked, and a garment can have a test report to EN 17092. What we hold is listed above under "What we hold".
Can you fit armour that meets EN 1621-1 and EN 1621-2?
We fit removable armour in pockets built for it. Our armour is CE-marked to EN 1621-1 and EN 1621-2, Level 1 as standard and Level 2 on request.
Can I test a product before I sell it?
Yes, on the approved sample. Ask us how testing would be arranged for your product.
Ask about a material or a standard
Tell us the garment and the market you sell in, and we will tell you what we can document.
