Motorcycle leather gear manufacturer · Sialkot, Pakistan · Since 2009

Custom motorcycle and racing gloves with your logo

Custom leather motorcycle and racing gloves with your logo and colours. Race gauntlets, short sport and cruiser styles, knuckle protection. Get a quote.

Request a quote How we work

Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. We make custom motorcycle gloves for teams, brands and online sellers, in your colours with your logo, sized in the run you sell.

Request a quote

Glove types

Teams often pair gloves with a custom race suit. Brands often add them to a jacket range.

Glove types
TypeCuffTypical riderOften paired with
Race gauntletLong, over the suit sleeveTrack and raceRace suit
Short sportShort, under the jacket cuffSport and streetSport jacket
Short touringShort, often linedRoad and touringTouring jacket
CruiserClassic, often unlinedRelaxed ridingCruiser jacket, vest

Knuckle and palm protection

Black and red leather race gauntlet gloves with knuckle protection and palm sliders
Black and red leather race gauntlet gloves with knuckle protection and palm sliders

This race gauntlet shows the main protection features: a hard knuckle protector across the back of the hand, and palm sliders at the base of the palm. Gloves can also have reinforced panels at the heel of the hand and the outside edge of the palm, plus finger and thumb overlays where your riders need them.

More protection adds weight and stiffness, so we agree it with you. A track glove carries the full set. A short city glove may carry padded knuckles only.

Protection in motorcycle gloves is covered by a separate standard, EN 13594. We claim no rating unless a test report exists for that glove, and we do not state an EN 13594 rating for our gloves on this page. If your market needs one, tell us at the quote stage.

Short styles

Two short gloves from our range: black touring gloves, and black sport gloves with padded knuckles.

Leather choices

  • Cowhide: the common choice. Hard-wearing and good value.
  • Goatskin: softer and lighter, with a closer feel on the bars.
  • Other leathers: buffalo and kangaroo are part of our leather range. Ask us what suits the glove you have in mind.

A thinner palm gives better feel on the controls but wears faster, so most racing gloves use a reinforced palm. Leather types, finishes and care are explained on materials and standards.

Construction details

Gloves are small garments with many parts. We agree the details with you before sampling:

  • Stitching. Double or triple stitching on stress seams, with seams placed away from the palm where possible.
  • Closures. Hook-and-loop wrist straps, cuff closures and gauntlet straps.
  • Lining. Soft lining for comfort, or unlined for a closer feel.
  • Touchscreen tips. A fingertip panel for phones, if you want it. We offer touchscreen tips.
  • Pre-curved fingers. A shaped fit that reduces bunching on the bars.

Protection parts: what to specify

Close-up of a leather racing glove showing the knuckle protector, finger sliders and palm slider
Close-up of a leather racing glove showing the knuckle protector, finger sliders and palm slider

The close-up shows the parts we are talking about: a knuckle protector, finger sliders and a palm slider. Each is a choice, not a given.

  • Knuckle protector: hard shell or soft padding. Hard shells suit track use. Soft padding suits street and cruiser gloves.
  • Finger and thumb protection: sliders or overlays on the outer fingers and thumb. These add stiffness, so ask where your riders need them.
  • Palm sliders: at the heel of the hand, the first place that meets the road in a fall. Where does your rider's glove need one?
  • Wrist closure: a single strap or a double strap, which keeps the glove on in a slide.

Specify the use, the knuckle type and where sliders go, and we advise on the rest. Protection adds weight, so a lighter glove may leave something out on purpose.

Colours and logos

Pair of black leather race gloves, back with knuckle armour and palm, with a small red emblem on the cuff
Pair of black leather race gloves, back with knuckle armour and palm, with a small red emblem on the cuff

Leather colour blocking and contrast stitching, embroidered logos or names on the cuff or back of hand, printed or embossed logos, and woven labels and hang tags for sellers. A logo on the cuff of a gauntlet has more room than one on the back of a short glove, so we check the size on the mock-up. Send vector artwork (AI or PDF). We confirm the mock-up timing with your quote.

Request a quote

Sizing

We work from your size run, for example men's and women's sizes, with a size chart you approve on the sample. A locked size chart keeps reorders consistent, which matters if you sell online.

If you need a team fitted, send two hand measurements: the width of the palm across the knuckles, and the length from the wrist crease to the tip of the middle finger. We advise the size.

Who orders custom gloves

  • Teams and clubs that want gloves to match suits or vests, with the team logo on the cuff.
  • Brands that want a glove to sit alongside their jacket range.
  • Online sellers who add a glove as the easy second purchase. See OEM and private label for how a private label run works.

Minimum order and lead time

  • Minimum order: 1 piece. Single pairs are welcome.
  • Sample time: 10–15 working days after you approve the artwork.
  • Bulk production: depends on quantity and is confirmed with each quote.
  • Reorders: timing is confirmed when you place the order.
  • Payment: 100% upfront, by bank transfer (T/T), PayPal, or card / Payoneer.

What to send for a glove order

  • Glove type and the leather you want
  • Colours, or a photo of a glove you like
  • Logo as AI or PDF, and where it goes
  • Protection wanted: knuckle, palm, finger or thumb overlays
  • Size run, or the hand measurements of your team
  • Packing needs: labels, hang tags, poly bags

How a glove order runs

Gloves are sold as pairs, so we check that left and right match in colour, size and finish. The overall process is on how we work.

  1. Brief

    Glove type, leather, colours, logo and the sizes you need.

  2. Mock-up

    A flat design showing colours, logo position and protection panels.

  3. Sample

    One pair, checked for fit, stitching and logo placement.

  4. Approval and production

    Full order made to the approved sample.

  5. Quality check and packing

    Pairs checked and matched, then packed in your labels and bags.

Custom glove FAQ

Can you put our club or team logo on gloves?

Yes. Logos can be embroidered, printed or embossed. Send a vector file and we mock it up first.

What is the minimum order?

One pair. Single products are welcome.

Which leather is best?

Cowhide for value and wear, goatskin for a softer feel. Ask us about kangaroo or buffalo if you want something different.

Are the gloves tested to a standard?

Glove protection is covered by EN 13594, and we only state a rating where a test report exists. We do not state one for our gloves here, so ask us if your market needs it.

How long does a glove order take?

Sample: 10–15 working days after you approve the artwork. Bulk production depends on quantity and is confirmed with each quote. Reorder timing is confirmed when you place the order.

Request a quote

Send your logo, colours, glove type and sizes and we reply within 24 hours.

Looking for private label gloves to sell under your own name? See OEM and private label.