Motorcycle leather gear manufacturer · Sialkot, Pakistan · Since 2009

Insights

Kangaroo leather race suit vs cowhide: what the sources actually say

Kangaroo vs cowhide for race suits: strength per thickness, weight, cost, care and California's kangaroo law, with sources. Choose for your riders.

Hands cutting black cowhide leather with a knife along a cardboard pattern piece on a cutting table
Hands cutting black cowhide leather with a knife along a cardboard pattern piece on a cutting table

A kangaroo leather race suit can be thinner and lighter than a cowhide suit, because kangaroo leather keeps more of its strength when it is cut thin. Cowhide is cheaper, easier to find and fine for most riders. Neither leather sets the safety class of a suit: that comes from testing the finished garment.

This guide compares the two for teams, clubs and brands ordering race leathers. It separates what a source supports from what sellers repeat. Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory, so we say plainly where we can and cannot back a claim.

Key Takeaways- Per unit of thickness, kangaroo leather is stronger than cowhide. That lets a suit use thinner leather.- The popular "10 times stronger" figure traces to a press release, not a published test. We do not use it.- No source we found gives measured weights or head-to-head abrasion results for finished suits. Total weight depends on lining, armour and construction too.- Kangaroo usually costs more. Sales of kangaroo products are restricted in California.- Ask for the test report of the exact suit, whichever leather it uses.

Strength: what is supported and what is not

Kangaroo leather is described as among the strongest leathers of similar substance, with the research traced to CSIRO studies. The clearest sourced detail is about thin splitting: kangaroo split to 20% of its original thickness keeps 30 to 60% of its unsplit tensile strength, while calf split the same way keeps 1 to 4% (Wikipedia, citing Stephens 1987).

That is why suit makers can use a thinner hide without giving up as much strength. It is the strongest argument for kangaroo, and it is about strength per thickness, not about how long a finished suit lasts.

You will often see kangaroo called "10 times stronger than cowhide". Wikipedia cites a news release for that figure, not a laboratory paper. It is a ratio at equal thickness at best, and it does not mean a suit lasts ten times longer. We leave the figure out.

We found no published, head-to-head abrasion results for finished kangaroo and cowhide race suits in the sources we could open. The fair way to compare two suits is their tested class and their certificates. For how that works, see what is EN 17092.

Thickness and weight

Leather thickness is measured in millimetres. One custom suit maker publishes its own specification: kangaroo at 0.8 to 0.9 mm and cowhide at 1.3 to 1.4 mm (Bleed Racing Gears). That is a vendor's product spec, not a standard, and other makers will differ. Our cowhide for race suits is 1.2–1.4 mm.

Thinner leather weighs less per area, so a kangaroo suit is normally lighter than a cowhide suit of the same cut. We cannot give a percentage, because the sources we opened publish none. Total suit weight also depends on lining, armour, perforation, stretch panels and size.

Thickness has a rules angle too. The FIM Track Racing regulations for 2025 say a suit "shall have a thickness of 1 [mm] minimum" (not required for Flat Track) (FIM, article 65.01). A thin kangaroo suit may sit near that line, so check how your series measures and enforces thickness before ordering.

Protection: the hide does not set the class

A garment's EN 17092 class is awarded to a specific tested suit. It is not a property of "kangaroo" or "cowhide". A manufacturer's EN 17092 booklet defines the classes by performance requirements in the tested zones of the garment, not by a material name (SHIMA EN 17092 booklet). So the result depends on the finished suit, and either leather can be used in a tested suit.

We do not describe any suit as EN 17092 rated unless a test report exists for that exact suit. We hold an EN 17092 class AAA test report for one race suit, and it does not cover other designs. See materials and standards.

Cost and availability

Kangaroo leather usually costs more than cowhide, because it is a thinner, lower-volume material. We found no neutral source with price figures, so we do not quote any. The gap depends on the suit, the grade of leather and the order size, so ask for both leathers quoted side by side.

Kangaroo leather comes from animals harvested under government-controlled management plans, so supply depends on those programmes (Wikipedia). Cowhide is the more common material. We work with both: cowhide, and kangaroo, as well as buffalo and goatskin.

Feel, fit and care

Both leathers can be made supple. Break-in time varies by hide, finish and cut, and we did not find a neutral source that measures it, so we do not rank them here. What matters more for fit is measurement: a suit that fits in the tuck keeps armour over the joints, in either leather. See custom race suits for how we measure teams.

Care is similar for both, and the manufacturer booklet sets out the basics: wipe with a damp cloth, use a leather cleaner suited to the leather, dry naturally away from direct heat, avoid solvents and fuel, and avoid wearing leather in the rain (SHIMA booklet). Follow the label in your suit.

Not sure which leather suits your riders? Tell us how many riders, the series you race in and your budget. We can quote both leathers side by side. Request a quote

Sourcing, ethics and California law

Kangaroo leather raises questions cowhide does not.

Harvest. Wikipedia reports that kangaroos are harvested under government-controlled management plans meant to be sustainable and humane, that a small number of large species may be hunted commercially, and that some wildlife activists criticise the policy.

California. California Penal Code section 653o makes it unlawful to import for commercial purposes, possess with intent to sell, or sell in the state the body, or a part or product, of a kangaroo. A violation is a misdemeanour with a fine of $1,000 to $5,000, jail up to six months, or both, per violation. The ban dates from 1971, was suspended from 2007 to 2016, and came back into force on 1 January 2016 (Center for a Humane Economy report, 2020, which reproduces the statute).

The same report says enforcement was minimal when it was written in 2020. Its publisher campaigns against the kangaroo trade, so read it as an advocacy source, and check what is enforced today.

Federal. A federal Kangaroo Protection Act was introduced in 2025 (H.R. 1992 in the House and S. 2162 in the Senate). Search results indicate it had not passed beyond introduction as of early 2026.

What this means for a brand: if you sell race suits to customers in California, get legal advice before you list a kangaroo suit, and consider cowhide for that market. This is not legal advice.

How to choose

  • Budget is tight: Lean cowhide: Yes; Lean kangaroo: No, usually costs more
  • Weight and suppleness matter most: Lean cowhide: Possible; Lean kangaroo: Yes, thinner leather
  • Series sets a minimum leather thickness: Lean cowhide: Easier to meet; Lean kangaroo: Check the rule first
  • You sell into California: Lean cowhide: Yes; Lean kangaroo: Get legal advice
  • You need a certificate: Lean cowhide: Ask for the report of the exact suit; Lean kangaroo: Ask for the report of the exact suit

Ordering for a team

If your riders differ in budget, quote both leathers and let each rider choose within one design. Check the series rulebook for thickness and format first. Our guide to one-piece vs two-piece race suits covers the format. Sample time: 10–15 working days after you approve the artwork. Whichever leather you choose, ask for the certificate for that exact suit.

Frequently asked questions

Is kangaroo leather stronger than cowhide?

Per unit of thickness, yes. Sources trace this to CSIRO research, and a clear finding is that thin-split kangaroo keeps far more tensile strength than calf. It does not mean a kangaroo suit is automatically safer than every cowhide suit.

Is a kangaroo leather race suit lighter?

Usually, because thinner leather weighs less per area. Total weight also depends on lining, armour and construction, and the sources we opened give no figures.

Is kangaroo worth the extra cost?

It depends on how much you value lower weight and suppleness. For a first suit or a tight team budget, cowhide is the usual choice. We can quote both.

Is kangaroo leather legal in California?

Selling kangaroo products in California is restricted under Penal Code section 653o, according to the statute as reproduced in a 2020 report. Check the current law and get advice before selling there.

Does the leather decide the EN 17092 class?

No. The class comes from testing the whole garment. Ask for the certificate for the exact suit.

Get both options quoted

Tell us your riders, your series and your budget. We will quote cowhide and kangaroo so you can compare them. Request a quote

Forty Seven Industries

Forty Seven Industries is a specialized manufacturer of motorcycle leather gear for brands, OEM clients, clubs and teams, and online and marketplace sellers: your brand, our factory.