Motorcycle leather gear manufacturer · Sialkot, Pakistan · Since 2009

Custom leather club vests for motorcycle clubs and riding groups

Leather club vests made to order for clubs and riding groups: back panel sizing, patches, embroidery and side laces. Club sizing and reorders. Get a quote.

Request a quote How we work

Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. We make custom motorcycle club vests for clubs, riding groups and chapters, so every member gets the same leather, the same cut and the same patch layout.

Request a quote

Vest styles

These are vests we have made: a brown naked-leather vest with side laces, and a black zip-front vest with a plain back panel.

The cuts we make

Two cuts cover most club orders, and we can work from a photo for anything else.

  • Classic vest. Straight cut with a plain back panel, ready for your patches. Snap or zip front.
  • Side-lace vest. Laces at the sides let members adjust the fit, which helps when one order covers different builds.

Not sure which cut fits your club? Send a photo of a vest you like and we will quote it.

What makes a club vest order different

A club order is not a retail order. Every vest has to look like it belongs to the same club, patches sit in the same place, and a vest ordered next year has to match one ordered today. We plan the order around that: one pattern, one spec sheet for patch positions, one size run for the whole membership, and one approved sample that every later vest is checked against.

The usual mistakes are predictable. Patches are ordered before anyone has measured the back panel. Sizes are guessed from a group photo. A second batch is made by a different workshop and the colour is slightly off. Most of what follows exists to prevent those three.

Leather options

Vests are cut from leather chosen for the job. Cowhide is the usual starting point (we also work in buffalo and goatskin): firm, hard-wearing and it takes patches well. A thicker hide holds a heavy back patch flat; a thinner one is more comfortable in summer but can pucker under dense embroidery. We agree the thickness for your vest on the spec sheet before the sample.

Lining, hardware and stitching are agreed before the sample. See materials and standards for the leathers we work with. A vest is a club garment, not a protective one, so we do not offer an EN 17092 class on it. If members will ride in it, tell us and we can talk about what a protective jacket would involve instead: custom motorcycle jackets.

Patches and the back panel

Back of a black leather vest laid flat with plain embroidered patches pinned in place and a tape measure across it
Back of a black leather vest laid flat with plain embroidered patches pinned in place and a tape measure across it

The photo shows a plain back panel, the part clubs get wrong most often. The panel has to be sized to the patches, not the other way round, so we agree a spec sheet before cutting.

Patches can be embroidered, woven or leather. Ask us about options for patches you already own and for patches we can supply. Names, ranks and chapter text can also be embroidered directly onto the leather. Send vector artwork (AI or PDF) where you have it.

What the back-panel spec sheet records

What the back-panel spec sheet records
ElementWhat we recordWho supplies it
Top rockerWidth, height, curveClub
Centre patchWidth, height, shapeClub
Bottom rockerWidth, height, curveClub
Edge marginsGap to each seam and edgeAgreed together
Front patchesPosition, size, numberClub
Embroidered textWording, font, sizeClub

Snap and hardware finishes

Leather vest fronts with snaps in polished nickel and antique brass finishes
Leather vest fronts with snaps in polished nickel and antique brass finishes

The photo shows the same snap in black, nickel and antique brass. The finish changes the look of the vest more than most members expect.

  • Black: low-key and modern. It disappears against dark leather, which is the point for clubs that want patches to carry the look.
  • Nickel / silver: bright and clean. It shows against black leather and ages slowly.
  • Brass / antique: warm and vintage. It suits brown and tan leathers and the worn-in look.

Pick one finish for snaps, zips and any buckles so the vest looks planned. Nickel will mark and brass will darken with use, which is part of the look. Agree the finish on the sample, because hardware in a photo is not the same as hardware on leather.

Hardware and finishing

Zips, snaps, lacing and stitching thread are chosen with the leather, so the vest wears evenly. Hardware finishes are covered above and agreed on the sample. Edges are finished so they do not fray or lift under patches. Inside, you can choose a plain lining or a lining with a pocket layout. Ask for the options and we quote them on the sample.

Club sizing day

  1. Pick a day

    Members try on sample vests, or measure themselves with our sheet.

  2. Record each size

    One person writes down name, size, any change and the style each member wants.

  3. Turn it into a size run

    We convert the list into counts per size, so the order covers every member without guessing.

  4. Note the exceptions

    Longer bodies, broader shoulders and extra length are written onto the order.

  5. Add a spare

    Many clubs add one or two spare vests in common sizes for new members.

Using a size rack at your sizing day

Rack of identical black leather vests hanging in increasing sizes
Rack of identical black leather vests hanging in increasing sizes

A rack of the same vest in rising sizes lets every member see the difference for themselves, instead of guessing from a chart. If you want one for your day, ask us about sample vests in a few sizes; otherwise the measurement sheet does the same job.

  • Try them on over what they wear: a T-shirt for summer, a sweater for winter. A vest fitted over a thin layer will feel tight later.
  • Check the snaps: at the front closure, a member should be able to breathe and sit without strain.
  • Note the size, not just the choice: write each size against a name so the order can be counted straight from the list.

When you place the order, we make the whole run on one pattern. New members can order a single vest later, as the minimum order is 1 piece, in the size they try on.

Colours and permissions

Proofing and approval

You approve a flat drawing with every patch position marked before we cut anything. We confirm the mock-up timing with your quote. One sample vest is then made and checked against the spec sheet. Once you sign it off, the full club order is cut and stitched. The full process is on how we work.

Reorders for new members

New prospects, new chapters, replacements: we keep your pattern, size chart and patch spec on file, so a reorder matches the original vests. Reorder timing is confirmed when you place the order.

For a step-by-step planning guide, read How to order custom club vests.

Minimum order, pricing and lead time

  • Minimum order: 1 piece. Single vests are welcome, and clubs have no separate minimum.
  • Club pricing: quoted per order. Ask us about price breaks for larger quantities.
  • Sample time: 10–15 working days after you approve the artwork. Samples are paid by the buyer and are not credited against the bulk order.
  • Bulk production: depends on quantity and is confirmed with each quote.
  • Payment: 100% upfront, by bank transfer (T/T), PayPal, or card / Payoneer.

What to send for a club order

  • Number of members and the style each wants
  • Sizes, or the result of your sizing day
  • Patch artwork as AI or PDF, with real sizes in centimetres or inches
  • Photos of any patches you already own
  • Leather colour and hardware finish
  • Target date, such as a club anniversary or a rally

Club vest FAQ

What is the minimum order for a club?

One piece. Single vests are welcome, so small chapters can order too.

Can you sew on our existing patches?

Send photos and sizes of the patches and we will advise on the layout.

How do we size a whole club?

Run a sizing day with sample vests or use our measurement sheet. We turn the list into a size run. See the club vest ordering guide.

How long does it take?

Sample: 10–15 working days after you approve the artwork. Bulk production depends on quantity and is confirmed with each quote.

Can we add members later and match the original vests?

Yes. We keep your pattern, size chart and patch spec for reorders. Reorder timing is confirmed when you place the order.

Do you protect our club's design?

Your artwork is yours. All designs are exclusive to the buyer and are never sold to others, and an NDA is available on request. We also need you to confirm you have the rights to every logo you send.

Request a quote for your club

Tell us how many members, the style and your patch sizes and we reply within 24 hours.

Looking for jackets as well? See custom motorcycle jackets.