Motorcycle leather gear manufacturer · Sialkot, Pakistan · Since 2009

Custom motorcycle race suits for teams, clubs and brands

Custom one-piece and two-piece leather race suits in your colours and sponsor logos. Cowhide or kangaroo, measured fit, team orders. Request a quote.

Request a quote How we work

Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. We make custom motorcycle race suits for teams, clubs, track-day groups and brands, in your colours, with your sponsor logos, cut to your riders' measurements.

These are race leathers for motorcycles. If you are looking for car or kart racing suits, this is not the right page.

Request a quote

Who our race suits are for

  • Racing teams. One design, many riders, each suit measured to fit.
  • Clubs and track-day groups. Matching suits in club colours, often ordered once a year.
  • Race schools. Suits for instructors and loan fleets, sized as a run.
  • Brands. Your own race suit range, with your label, made in our factory.

The order looks different for each group. A team cares most about sponsor placement and getting every rider's fit right. A school cares about a size run that covers the people who will borrow the suits. A brand cares about a pattern it can reorder for years. Tell us which one you are and we plan the order around it.

One-piece or two-piece

Black and green two-piece leather race suit with knee sliders, front view
Black and green two-piece leather race suit with knee sliders, front view

A one-piece suit is the usual choice for track and race use: no join at the waist, fewer places for the suit to ride up when the rider is tucked in. A two-piece suit zips together at the waist. The rider can wear the jacket or the trousers on their own, and the top and bottom can be cut in different sizes.

The photo shows a black and green two-piece suit from the front, with knee sliders. If your series or track organiser has clothing rules, check them before you choose. Our guide One-piece vs two-piece race suits goes through the decision for teams.

One-piece and two-piece at a glance

One-piece and two-piece at a glance
 One-pieceTwo-piece
Typical useTrack days and racingTrack, plus road and mixed use
WaistNo joinZip connection at the waist
Wear separatelyNoJacket or trousers on their own
SizingOne size for the whole suitTop and bottom can differ
Changing a size laterReplace the suitReplace one half
Getting dressedOne piece to step intoTwo pieces, zipped together

What goes into a race suit

The picture shows a rider in a finished suit, with the protective parts lifted off where they sit. We agree each of them with you on every order:

  1. Speed hump behind the helmet, for airflow and neck support
  2. Shoulder slider, a hard cap on the outer shoulder
  3. Shoulder armour in a pocket at the shoulder
  4. Back protector
  5. Elbow armour
  6. Elbow slider, replaceable
  7. Hip protector
  8. Extra layer of leather on high-wear zones such as the outer thigh
  9. Knee armour
  10. Knee slider, replaceable, on the outside of the knee
Exploded view of a rider in a leather race suit: hump, sliders, armour, back and hip protectors and an extra leather layer lifted off and labelled
Exploded view of a race suit, numbered as in the list

Cowhide or kangaroo leather

Cowhide is the common, hard-wearing choice and the easier one to match across a large team order. Kangaroo leather is lighter and strong for its weight, so a suit can be thinner without losing abrasion resistance. It usually costs more than cowhide, which is worth weighing on a large team order.

For example, a club might choose cowhide for its novice riders' suits and kangaroo for two or three sponsored racers. We quote both side by side. Our cowhide for suits is 1.2–1.4 mm. For the full comparison, see materials and standards and the guide on kangaroo vs cowhide.

Perforation, stretch panels and graphics

  • Perforated panels let air through on the chest, arms and legs. They are placed away from the highest-wear zones. Worth it for hot tracks; unnecessary for cold-weather riding.
  • Stretch panels at the back, elbows, knees and underarms let the suit move with a rider in a tucked position.
  • Colour blocking, piping, names, numbers and sponsor logos are placed on a flat design template before anything is cut. Send logos as vector files (AI or PDF) so they print or embroider cleanly.
  • Airbag-ready construction. We can build suits to take an airbag system. Tell us which system you use and we will confirm what the suit needs.

Request a quote

How riding use shapes the suit

Racer leaning into a corner on track with the knee slider of a black, red and white leather race suit on the asphalt
Racer leaning into a corner on track with the knee slider of a black, red and white leather race suit on the asphalt

The same suit is not right for every rider. The photo shows a racer at full lean with the knee slider down, which is where the spec starts to matter.

  • Track days: comfort over long sessions comes first. More perforation, a standard hump or none, and a fit that works standing as well as tucked.
  • Racing: a tighter fit in the tuck, a hump matched to the helmet, and sliders that are easy to swap between sessions. Check the series rulebook.
  • Road and mixed use: less aggressive cut, more stretch for walking, and often a two-piece so the jacket can be worn alone.

Slider type is the other choice. Replaceable sliders let a rider change worn pads without touching the suit. Fit matters most of all: a suit that is comfortable standing can bunch behind the knees or lift at the back once the rider is tucked, so tell us the riding position and we fit for it.

Speed hump, sliders and armour pockets

Black and green two-piece leather race suit, back view with speed hump
Black and green two-piece leather race suit, back view with speed hump

The back view shows the speed hump on the same two-piece suit. The hump sits behind the shoulders and gives room for the rider's head position and for airflow at speed. Some riders prefer a suit without one, which is a build option, not a default.

Knee sliders and elbow sliders are the replaceable pads that touch the ground first in a lean. Armour pockets at the shoulders, elbows, knees and back hold removable armour. We fix the position of all three on the mock-up, because armour that sits off the joint protects less.

Protection and standards

A race suit is protective equipment, so we are plain about what is and is not claimed.

Armour. Suits are built with pockets for CE armour. Shoulder, elbow, knee and hip armour is tested to EN 1621-1, and back protectors to EN 1621-2, at level 1 or level 2. Our armour is CE-marked to EN 1621-1 and EN 1621-2, Level 1 as standard and Level 2 on request. Certificate details are available on request.

EN 17092. This is the European standard for motorcycle protective clothing. It sorts garments into classes from AAA (highest protection) down to class C. The class depends on testing the whole garment for abrasion, seam strength and tear strength, and it is awarded to a tested garment, not to a leather type. Class AAA is aimed at the highest-risk riding, such as track use. The guide What is EN 17092? explains each class, and so does materials and standards.

Series rules. Some race organisers set their own clothing rules or accept different standards. Read the rulebook for the series or track day you ride in before you pick a spec.

What we do not claim

Measuring and fit

Tailor measuring a rider's chest with a tape measure in a leather workshop
Tailor measuring a rider's chest with a tape measure in a leather workshop

Fit is the reason people order custom race leathers, so we keep it systematic.

  1. Measurement sheet. We send a measurement sheet with simple instructions. Each rider is measured the same way, ideally by a second person, in thin clothing, standing relaxed. Typical numbers are height, weight, chest, waist, hips, arm length, inseam and thigh.
  2. Rider asymmetry. Note differences such as arm length, leg length or a one-sided injury and we build them in.
  3. Our check. We compare the numbers against each other and flag anything that looks wrong before we cut. A rider who measures a 12 cm longer left arm will get a question, not a suit.
  4. Fit check on the sample. The sample suit is tried on and adjusted before the team order goes into production.

Fit policy: if a made-to-measure suit does not fit, we alter it free of charge.

Size run or full made-to-measure

A size run grades one pattern into standard sizes and each rider takes the closest one. Made-to-measure cuts each suit to the rider's own numbers.

Example size run for a 12-rider team: EU suit sizes 46 to 56 with 1, 2, 3, 3, 2 and 1 riders per size.
Example: planning sizes for a 12-rider team

Placing a team order: an example

For example, a 12-rider club orders two-piece suits in two colourways: black and green for ten members, black and white for two instructors. The club collects measurements on one evening. Five riders fit standard sizes, four need a different size on the top and the trousers, and three have measurements that fall between sizes, so they are cut made-to-measure.

We send one mock-up with both colourways and each rider's name on the back. The club signs it off. We make one sample suit in the most common size, the club tries it on, and we adjust the pattern. The twelve suits are then cut and stitched against that approved sample. This is an illustration of how an order can run, not a record of a real client.

When a rider joins the club the next season, we reuse the pattern and artwork for one more suit. Reorder timing is confirmed when you place the order.

  1. Quote and spec. You send the number of riders, sizes, colours and logos.
  2. Mock-up proof. You approve a flat design with every logo, name and number placed. We confirm the mock-up timing with your quote.
  3. Sample suit. One suit is made and fitted before the full order. Samples are paid by the buyer and are not credited against the bulk order. A sample takes 10–15 working days after you approve the artwork.
  4. Approval. You sign off the sample, or we adjust and resubmit.
  5. Production and QC. The team order is made and each suit is checked against the spec.
  6. Shipping and reorders. Pack and ship.

The full process is on how we work.

Minimum order, pricing and lead time

  • Minimum order: 1 piece. Single suits are welcome, and clubs and teams have no separate minimum.
  • Team pricing: we quote per order. Ask us about price breaks for larger quantities.
  • Sample time: 10–15 working days after you approve the artwork.
  • Bulk production: depends on quantity and is confirmed with each quote.
  • Reorders: timing is confirmed when you place the order.
  • Payment: 100% upfront, by bank transfer (T/T), PayPal, or card / Payoneer.

If you have a small number of riders, that is fine. Price usually falls as the quantity rises, because the pattern, mock-up and sample are the same cost for 5 suits or 50.

What to send for a team order

Missing something? Send what you have. We would rather start with a rough brief than lose time.

  • Number of riders, with sizes or measurements
  • Colours, or a photo of a suit you like
  • Logos and sponsor artwork as AI or PDF files
  • Names and numbers for each suit
  • Which suits are one-piece and which are two-piece
  • Leather choice, and perforation yes or no
  • Armour you want fitted, or the series rule it must meet
  • Your target date, such as a season start or a race weekend

Suits we have made

The photos on this page are Forty Seven suits. We will add more examples here as clients give us permission to show their suits.

Custom race suit FAQ

Should we order one-piece or two-piece suits?

One-piece suits are the usual race and track choice. Two-piece zip-together suits suit riders who also want to wear the jacket or trousers alone, or whose top and bottom sizes differ. Our one-piece vs two-piece guide goes through it.

Is kangaroo leather better than cowhide?

Kangaroo leather is lighter for the same strength, so suits can be thinner and more flexible. Cowhide is more common and wears well. Which is right depends on your riders and budget. We can quote both.

How does measuring work?

We send a measurement sheet with simple instructions. Riders measure themselves, or someone measures them, and send the numbers back. We check them and flag anything that looks wrong before we cut.

What is the minimum order for a team?

One piece. Single suits are welcome, and there is no separate team minimum.

How long does an order take?

Sample: 10–15 working days after you approve the artwork. Bulk production depends on quantity and is confirmed with each quote. We give you dates before you pay.

What logo files do you need for sponsors?

Vector files (AI or PDF) are best. If you only have a PNG or JPG, send it anyway and we will tell you if it needs redrawing.

Are your race suits CE certified or EN 17092 rated?

CE and EN 17092 apply to tested garments, and we only claim a rating where a test report exists. We hold an EN 17092 class AAA test report for one race suit, and our armour is CE-marked to EN 1621-1 and -2. Materials and standards explains the classes.

Can you repair suits and reorder for new riders?

Reorders reuse your pattern and artwork, so new riders get a matching suit. Reorder timing is confirmed when you place the order. If a made-to-measure suit does not fit, we alter it free of charge.

Request a quote for your team

Send us your rider count, sizes, colours and logos and we reply within 24 hours.

Also see our custom club vests and custom motorcycle gloves for matching team gear.