Insights
What is EN 17092? Motorcycle clothing protection classes explained
EN 17092 explained: classes AAA, AA, A, B and C, what is tested, how to read the label, and which papers brands should ask a supplier to show.

EN 17092 is the European standard for motorcycle riders' protective clothing. It sorts garments into five classes, AAA, AA, A, B and C, by how they perform in tests for abrasion, seam strength and tear strength. Impact protectors are tested to a separate standard, EN 1621. The class belongs to one specific, tested garment, not to a type of leather or a brand.
This guide is for riders, clubs and brands who buy or order motorcycle clothing. Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. We explain the standard so you can judge any supplier's paperwork, ours included.
Key Takeaways- EN 17092 has five classes. AAA is the highest, AA is the middle, A is the lightest. B has no impact protectors. C only holds protectors in place.- A class is awarded to a specific garment after testing, and is shown on its label with the standard's number.- Armour is rated separately, to EN 1621-1 (limbs) or EN 1621-2 (back), at Level 1 or Level 2.- In the EU, motorcycle clothing is Category II PPE. It needs an EU-type examination by a notified body, not a self-declaration.- Ask for the certificate and declaration of conformity for the exact garment.
What EN 17092 is, and why it exists
EN 17092 is a series of six documents, published in 2020. Part 1 sets the test methods. Parts 2 to 6 set the requirements for the five classes (BIMEO, a notified body).
It exists because motorcycle clothing became regulated protective equipment. Regulation (EU) 2016/425 on PPE has applied since 21 April 2018, and clothing designed to protect the wearer and sold in Europe must be certified before sale (SATRA, a UK test house).
The older standard, EN 13595, was written for professional riders such as couriers and police. BIMEO's page says the 2020 series replaces it with a five-class framework for general (non-professional) riding clothing. Bennetts BikeSocial reports that EN 13595 was withdrawn in September 2022 (Bennetts, November 2026).
The five classes in plain words
The table below follows the wording of a manufacturer's EN 17092 user booklet, simplified.
- AAA: Part of the standard: EN 17092-2; What it is for: Highest protection, for the highest risk. Examples: one-piece or two-piece suits. Expect weight and heat penalties.
- AA: Part of the standard: EN 17092-3; What it is for: Second highest. Aimed at the widest range of riding. Fewer weight and comfort penalties than AAA.
- A: Part of the standard: EN 17092-4; What it is for: Third level. Lightest and least restrictive. Suits warmer conditions or wear over other clothing.
- B: Part of the standard: EN 17092-5; What it is for: The same abrasion protection as class A, but no impact protectors.
- C: Part of the standard: EN 17092-6; What it is for: A non-shell garment that only holds impact protectors in place, for example an armoured under-layer. No abrasion protection claim. Sources: SATRA and the SHIMA EN 17092 user booklet.
Two points that catch people out:
- Class B is not "AA without armour". It matches class A abrasion requirements, and the booklet recommends adding certified protectors to complete the protection.
- Class C is not a jacket. It is a carrier for protectors. It is meant to be worn with, and add to, a garment of another class.
A higher letter is not automatically better for every rider. Class AAA is built for high-risk riding and carries the weight and heat that come with it, and the booklet advises matching the class to the riding.
What is tested
Parts 2 to 6 draw on the test methods in Part 1. The garment is divided into three risk zones: zone 1 is high risk of impact, abrasion and tearing, zone 2 moderate and zone 3 low (SATRA). Higher classes set tougher requirements.
The main tests, as described by SATRA, BIMEO and a buyers' guide (AGVSport):
- Impact abrasion. A sample is thrown against a moving concrete surface on a "Darmstadt" machine, simulating a 75 kg rider sliding to a stop. The layer closest to the body must not be holed through by an opening of 5 mm or more.
- Tear strength. How much force it takes to tear the material. One buyers' guide names ISO 3377-1 for leather.
- Seam strength. How much force it takes to burst a seam, and the strength of closures. The same guide names ISO 13935-2 for the seam test.
- Dimensional stability. After cleaning, the material must not shrink more than 5%.
- Protector restraint. Sleeves are tested at 50 N for 30 seconds. For two-piece suits, the jacket-to-trouser connection is tested at 100 N for 60 seconds.
- Safety of the material. Chemical checks, such as pH and harmful substances.
One buyers' guide lists example Zone 1 limits, for instance seam strength of at least 10 N/mm for AAA, 7 for AA and 4 for A (AGVSport). It calls them "simplified", so use the standard itself for the real figures.
Armour is rated separately
The class says nothing about the armour fitted in the garment. Armour is tested to EN 1621:
- EN 1621-1 covers limb protectors, for shoulders, elbows, hips and knees.
- EN 1621-2 covers back protectors.
- Both have Level 1 and Level 2. Level 1 gives protection with low ergonomic penalties. Level 2 gives increased protection with possible weight and restriction penalties (SATRA).
Limb protectors (shoulder, elbow, knee, hip) are mandatory in classes AAA and AA. In class A, hip protectors are optional (BIMEO). So a class AA jacket can carry Level 1 armour. Check both the class and the armour level.
How to read the label
A garment that meets EN 17092 carries a label and comes with user information. One manufacturer's booklet lists:
- the CE mark
- the motorcyclist pictogram, which shows it is protective clothing for riders
- the performance class
- the standard it was tested to, for example "EN 17092-3:2020"
- an information pictogram showing that a booklet is supplied, and the size marking
The booklet also says where the EU declaration of conformity can be found (SHIMA booklet). A CE mark alone, or "CE approved" on a product page, is not a class.
What certification means for a brand
Under Regulation 2016/425, motorcycle clothing is Category II PPE. The route is an EU-type examination by a notified body, followed by the maker's own production control. The notified body checks the technical file and the garment, runs the tests and issues a certificate if the type complies (BIMEO). The manufacturer then draws up the declaration of conformity.
Three points for brands:
- A brand that sells under its own name usually takes on the manufacturer's duties, even if a factory makes the garment. Agree who holds the certificate before you order.
- Changes can matter. One retailer guide says altering the armour or cutting panels differently voids certification "in practice" (JADO Moto). Ask what counts as a change to the tested type.
- The UK has its own route. Great Britain recognises CE marking for PPE with no end date, and UKCA marking through a UK approved body is still available (US International Trade Administration, 2023). This is not legal advice.
What the standard cannot promise
A class is a result in a laboratory test, not a promise about a crash. In 2026 Bennetts BikeSocial tested 11 pairs of AAA-rated motorcycle jeans at SATRA and found relative abrasion times from 0.53 seconds to an average of 2.97 seconds across the group (Bennetts BikeSocial). The author argues the highest class does not reliably separate good from weak abrasion performance, while stating this is not a call to withdraw the standard.
Treat the class as an entry ticket, then look at construction: leather and thickness, seams, lining and armour position. Our comparison of kangaroo and cowhide for race suits shows why the hide name alone does not set the class.
What to ask a supplier to show you
If you are a club, team or brand ordering protective clothing, ask for the following, for the exact style you are buying.
- The EU-type examination certificate. It should name the notified body, the standard and part (for example EN 17092-2:2020), the class, the date, and the garment it covers.
- The EU declaration of conformity for that style.
- The test report, or at least confirmation of which style, leather, thickness, lining and armour model were tested.
- The armour certificates, to EN 1621-1 or EN 1621-2, with the level.
- A sample label and the user booklet, so you can check the class and the standard number.
- A written answer on changes. If you change leather, panels, colour blocking or logos, who decides whether the tested type still applies?
- The notified body's identity, which you can look up in the European Commission's NANDO database.
If a supplier cannot show these, treat any "EN 17092" or "CE" claim as unproven. We follow the same rule: we do not describe any garment as CE certified or EN 17092 rated unless a test report exists for that exact garment. What we hold is listed on materials and standards: an EN 17092 class AAA test report for one race suit, and CE armour certificates for EN 1621-1 and EN 1621-2 (Level 1 as standard, Level 2 on request). Certificate details are available on request.
If you are ordering custom or team garments
A custom race suit or jacket is a new garment. A different cut, leather or panel layout is a different tested type, so someone else's class does not carry over to yours. If your market needs a classed garment, plan testing on the approved sample before bulk production, and allow time for it; ask us how testing would be arranged for your product. Our sample time is 10–15 working days after you approve the artwork. See our page on custom race suits or custom motorcycle jackets, and how we work.
Planning a protective range or a team order? Tell us the garment, the market and the class you need. We will tell you what we can document and what would need testing. Request a quote
Frequently asked questions
What is the difference between EN 17092 class A and AA?
AA is the higher class and covers a wider range of riding. A is lighter and has the least weight and heat penalty. Both need impact protectors at the shoulders, elbows and knees. In class A, hip protectors are optional (BIMEO).
Is class AAA always safer than AA?
Not for every rider. AAA is built for the highest-risk riding and brings more weight and heat. Choose the highest class you will actually wear, then check armour level and fit.
Does EN 17092 replace CE Level 1 and Level 2 armour ratings?
No. Armour is tested to EN 1621 and carries its own Level 1 or Level 2 rating. A garment's class and its armour's level are separate.
What happened to EN 13595?
It was written for professional riders and EN 17092 replaces it. Bennetts reports it was withdrawn in September 2022, but some racing rules still accept EN 13595 leather.
Is a garment with CE-marked armour "CE certified"?
No. CE-marked armour is certified as armour. The garment needs its own EU-type examination to carry a class. This is the same position we take on our materials and standards page.
Is EN 17092 required for race suits?
It depends on the series. The FIM's 2025 Track Racing rules only recommend a suit that meets EN 17092-3 (AA) tests, and accept EN 13595 leather (FIM Track Racing Technical Regulations 2025). Read the rulebook of the series or club you ride in.
Ask us about your own garments
Planning a custom suit, jacket or range? Send us the details and we will say plainly what we hold and what a test would involve. Request a quote
Forty Seven Industries
Forty Seven Industries is a specialized manufacturer of motorcycle leather gear for brands, OEM clients, clubs and teams, and online and marketplace sellers: your brand, our factory.
