Motorcycle leather gear manufacturer · Sialkot, Pakistan · Since 2009

Insights

How to order custom motorcycle club vests: a step-by-step guide

How to order custom motorcycle club vests: styles, back panel and patch sizes, patch types, proofs, sizing a whole club and reorders for new members.

Back of a black leather vest laid flat with plain embroidered patches pinned in place and a tape measure across it
Back of a black leather vest laid flat with plain embroidered patches pinned in place and a tape measure across it

To order custom motorcycle club vests, work in this order: pick the vest style and leather, measure the back panel against your patch sizes, agree a proof before anything is cut, run a sizing day for the whole club, and keep the approved spec for reorders. Most problems come from patches that do not fit the back panel, so start there.

Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. We make club vests to order, and this guide is the plan we would want an ordering officer to follow, whoever the maker is. It sits alongside our custom club vests page.

Key Takeaways- Size the vest to the patches, not the other way round. Measure the back panel, not the chest.- A typical back panel on a large club-cut vest leaves about 15 to 17 in (38 to 43 cm) of clear width. A centre patch is often 10 to 14 in (25 to 36 cm).- Leave about 1 in (2.5 cm) of margin around each patch, and keep patches off seams.- Sew patches onto leather. Iron-on heat can damage it.- Get a written spec sheet and an approved sample. They make every later vest match.- Never copy another club's name, colours or insignia.

1. Choose the vest style

Three styles cover most clubs.

  • Classic vest. Straight cut with a plain back panel, ready for patches.
  • Side-lace vest. Laces at the sides let members adjust the fit. One vest guide says side lacing adds 2 to 3 in of adjustment and helps keep the back panel flat (MotoGearRater).
  • Vest with an inside pocket. Pockets and pocket layouts are agreed with the maker before the sample. Ask us about inside-pocket options for your style.

Send a photo of a vest you like, so the maker can quote that cut.

2. Pick leather, lining and hardware

Cowhide is the usual starting point for club vests: firm, hard-wearing and able to carry patches. We agree the thickness for your vest before the sample. See materials and standards for the leathers we work with.

Think about the lining before you buy, because it affects sewing. MotoGearRater notes that an unlined vest is easiest to sew but shows stitching inside, and that a lining you can open at the hem lets you sew the shell and close the lining afterwards. A quilted lining can dimple under thread tension.

Hardware and thread colour are agreed with the sample.

3. Plan the back panel and patch sizes

This is the step that decides whether the order works.

Most clubs wear a three-piece set on the back: a top rocker with the club name, a centre patch with the insignia, and a bottom rocker, which usually shows the location. Colours are generally the club's property, and each club sets its own rules for them ([Wikipedia: Colors (motorcycling)](https://en.wikipedia.org/wiki/Colors_(motorcycling))).

Typical sizes from two sellers are below. They vary by club, so measure your own.

  • Clear back panel, large club cut: Typical size: about 15 to 17 in wide, 18 to 21 in tall; Source: MotoGearRater
  • Centre patch: Typical size: 10 to 14 in diameter or height; Source: Dutch Label Shop
  • Top rocker: Typical size: often 12 to 15 in wide; Source: Dutch Label Shop
  • Name and rank tags: Typical size: often 1 by 4 in; Source: Dutch Label Shop
  • Margin around a patch: Typical size: about 1 in; Source: MotoGearRater Sources: MotoGearRater and Dutch Label Shop. MotoGearRater shares an owner with a vest maker, and Dutch Label Shop is a patch seller, so treat these as typical ranges.

How to measure a back panel:

  1. Lay the vest flat and measure armhole seam to armhole seam at the widest point, and from the bottom of the yoke seam to the hem.
  2. Mark the seams. A centre back seam running through a patch is a problem, and the yoke seam should clear a top rocker by about 1 in.
  3. Cut paper templates at full size and tape them on. Look from a few feet away, on two different days if you can.
  4. Do not buy by chest size. A 44 in a fitted vest and a 44 in a club cut can differ by about 3 in of usable back width, says MotoGearRater.

Record the result as a back panel spec sheet: the width, height and margin of each patch, and its distance from each edge. We build the panel around this sheet.

4. Choose patch types and how to attach them

The common types are embroidered, woven and leather patches, plus embroidery stitched directly onto the leather. Dutch Label Shop says woven patches suit small text such as name tags, and embroidered patches suit bold logos.

For leather vests, it recommends sewing patches on and discourages iron-on backing because heat of around 320°F (160°C) can damage leather. If you already own patches, a maker may sew them on. Ask us about our patch options, and send photos and sizes first.

Send artwork as vector files (AI or PDF) where you have them.

5. Run a sizing day

A club order needs one size run, not a pile of individual guesses.

  1. Sizing day. Members try on sample vests or measure themselves with a sheet.
  2. Build the list. Write each member's size, any extra length or width, and whether they need side laces.
  3. Note the exceptions. Broad shoulders, long bodies or injuries go on the order.
  4. Confirm patch counts for each member, including rank and name tags, which differ by person.

We turn the list into a size run. The full process is on how we work.

Planning a club order? Tell us how many members, the style and your patch sizes. We reply within 24 hours. Request a quote

6. Approve a proof and a sample

Ask for two checks before the full order:

  • A mock-up proof. A flat drawing with every patch position and size marked. You approve it in writing.
  • A sample vest. One vest is made first and checked against the spec sheet. Sign it off, or send corrections.

Sample time: 10–15 working days after you approve the artwork. Bulk production depends on quantity and is confirmed with each quote.

7. Plan reorders for new members

Clubs grow. A vest ordered next year must match one ordered today. Keep the approved sample, the spec sheet, the size chart and the artwork files together, and ask your maker to hold the same set. We keep your pattern, size chart and patch spec on file. Reorder timing is confirmed when you place the order.

Our minimum order is 1 piece, so small chapters can order too. Club pricing is quoted per order; ask us about price breaks for larger quantities.

8. Respect club colours and other people's marks

Colours are tied to identity. A club's name, patch layout and insignia can also be legally protected. The Hells Angels Motorcycle Corporation, for example, owns registered trademarks for the club's marks and has taken legal action against companies and individuals, including a teenager who sold similar patches on eBay (Novagraaf, 2019).

So the rules for any order are simple:

  • Order only your own club's design, or a design a club has approved in writing.
  • Never ask a maker to copy another club's colours, wording or layout.
  • Confirm that you have the rights to every logo you send. We ask for that on every order, and we do not reuse a club's design for anyone else.

We show sample patches only, never a real club's colours without written permission.

What to send us

  • Number of members and a size list
  • Vest style, or a photo of a vest you like
  • Patch sizes, and the patches themselves if you own them
  • Artwork in AI or PDF format
  • Your target date, such as a rally or a charter anniversary

Frequently asked questions

How big should a back patch be on a vest?

It depends on the vest. A large club-cut vest typically leaves about 15 to 17 in of clear width and 18 to 21 in of height, and centre patches are often 10 to 14 in. Measure your own back panel and leave about 1 in of margin.

Can you sew our existing patches onto the vest?

That depends on the maker. For leather, sewing is recommended over iron-on, which can damage it. Ask us about our patch options. Send photos and sizes first.

How do we size a whole club?

Hold a sizing day with sample vests or a measurement sheet, build one size list, and note the exceptions. The maker turns it into a size run.

What is the minimum order for a club?

One piece. Single vests are welcome, so small chapters can order too.

Can we add members later and match the original vests?

Yes, if the pattern, size chart and patch spec are kept. Reorder timing is confirmed when you place the order.

Ready to order?

Send your member count, vest style and patch sizes. We will reply with a quote and a spec sheet to check. Request a quote. Looking for jackets as well? See custom motorcycle jackets.

Forty Seven Industries

Forty Seven Industries is a specialized manufacturer of motorcycle leather gear for brands, OEM clients, clubs and teams, and online and marketplace sellers: your brand, our factory.