Insights
How to start a motorcycle clothing brand: 8 steps from idea to first order
How to start a motorcycle clothing brand without owning a factory: pick your rider, a small first range, a production route, samples and a first order.

If you want to know how to start a motorcycle clothing brand, the short answer is this: choose one type of rider, launch with two or three products, have a specialist factory make them under your label, and test the first batch before you scale. You do not need your own factory. You do need a clear brief, a sample you have worn, and honest claims about protection.
Forty Seven Industries is a specialized manufacturer of motorcycle leather gear: your brand, our factory. This guide comes from the factory side of that table, so it focuses on the decisions a new brand owner makes before the first order.
Key Takeaways- Pick one rider and one problem first. A narrow brand is easier to design, photograph and sell.- Start with two or three products, not a collection. Gloves, one jacket and one vest is a workable set.- Decide your production route early: your own design (OEM), a factory's ready design with your label (private label), or a mix.- Never describe a garment as CE approved or EN 17092 rated unless a test report exists for that garment.- Judge the first batch by one thing: do customers come back for the second order.
Step 1: Choose the rider and the problem
Most guides to start a clothing brand say the same thing: choose a specific customer before you design anything. For motorcycle gear this matters more, because a track rider, a cruiser rider and a commuter want different jackets.
Write one sentence that finishes "My brand is for riders who..." For example: riders who want a plain, well-cut leather jacket for café racer bikes, or riders who tour in hot weather and want perforated leather. Then check it against the market:
- Who already sells to this rider, and at what price?
- What do reviews of those products complain about? Fit, weight, zips, armour that shifts?
- Can you describe the difference in one line a customer would repeat?
This is the stage where you decide your price band too. Work back from the retail price you want to the cost per piece. A factory can only tell you if the spec fits that cost if you give it a target.
Step 2: Pick a small first range
A small range is easier to launch, photograph and explain. A sensible starter set for an online motorcycle apparel brand:
- One jacket. The product that defines the brand.
- One pair of gloves. A lower-priced add-on that gets a first purchase.
- One vest or one pair of pants. Something that sells with the jacket.
Resist adding colours and sizes you cannot support. Every extra colour adds stock you have to sell. Two colours of one jacket in a full size run beats six colours in a thin one.
Step 3: Choose your production route
You have four common routes. Most new brands combine two of them.
- OEM: What it means: You supply the design or tech pack; the factory builds to it; Good for: A distinct jacket that is truly yours
- Private label: What it means: The factory's existing design, with your labels and packaging; Good for: The fastest start, with fewer development rounds
- Ready-to-brand range: What it means: A set of styles the factory already makes, branded for you; Good for: Testing the market with little development
- Drop shipping: What it means: The factory ships each order to your customer; Good for: Your own store, without holding stock Forty Seven has a ready-to-brand range; ask us which styles are available.
OEM gives you the most control and takes the most work. Private label is quicker but your product may look like another brand's if they use the same factory style. Ask any factory whether the design you pick is exclusive to you. For the full comparison of private label, wholesale and drop shipping, read private label vs wholesale vs dropshipping for motorcycle gear. Our page on OEM and private label manufacturing shows what each route involves at our factory.
Drop shipping deserves a line here. In the usual route, the path is manufacturer to you to your buyer, two shipments. With drop shipping the path is manufacturer to buyer: the factory ships each order to your customer. It removes a shipping leg and the need to hold stock. Forty Seven offers it to the USA, the UK, the EU and worldwide. The cost is the product price plus the actual shipping, quoted per order by destination.
Step 4: Write the brief and the tech pack
A factory can quote and sample accurately only from a clear brief. A tech pack is the document that does it. For a leather jacket it usually holds:
- A flat sketch of front, back and sides, with seam and stitch details
- Leather type and thickness (cowhide or kangaroo, in mm), plus lining and any stretch panels
- Hardware: zips (for example YKK), snaps, zip pullers
- Armour pockets and where they sit, and which armour you will fit
- Measurements per size and the grading between sizes
- Branding: logo placement, embossing, embroidery, woven labels, hang tags
- Colours, with references the factory can match
You do not need a perfect tech pack to begin. A sketch, reference photos and a clear description of how the jacket should fit and feel is enough for a first conversation, and a good factory will turn it into a pattern.
Sizes need a decision here, not later. Think about who your rider is: a jacket has to fit over layers and in a riding position, so check the size chart on a sample, not on paper. Lock the size chart once approved. That is what makes a reorder match the first batch.
Ready to talk specifics? Send us your sketch or a reference photo and your target price. We tell you if the spec fits, and what we would change. Request a quote.
Step 5: Be careful with protection claims
This is the step most new brands skip, and it is where trouble starts.
Protective motorcycle clothing is personal protective equipment. In the EU, the PPE Regulation (EU) 2016/425 sets the legal duties for design, manufacture and sale, and the European Commission explains that the CE marking may only be affixed after testing and the required conformity assessment (European Commission, personal protective equipment).
Garments for motorcycle riders are tested to the EN 17092 series, which sorts garments into classes. BSI, which publishes the standard in the UK, notes for example that Class C garments are worn with Class AAA, AA, A or B garments for added protection (BSI Knowledge, BS EN 17092-6). The class belongs to the finished garment, not to a leather or an armour insert on its own.
For a new brand that means:
- Armour that is certified does not make the jacket certified.
- A product page may only say a garment is CE approved or EN 17092 rated if a test report covers that garment.
- If you plan to sell protective gear in the EU or UK, ask what documents your market and marketplace require before you order. Do not assume.
- If your first range is not tested, say so in plain words, for example "fashion leather jacket with armour pockets" and not "protective". Tested ranges can follow once the first run proves demand.
Our materials and standards page explains leathers, armour and the EN 17092 classes, and says what we do and do not claim.
Step 6: Build the brand: name, labels and a trademark check
Pick a name you can own online and in your market. Check three things before you pay for labels or packaging:
- Trademark. Search existing marks in the countries you will sell in. The USPTO explains trademark basics and the federal registration process (USPTO trademark basics); the UK, the EU and other markets have their own registers.
- Domain and social handles. Check they are free before you commit.
- Rights to your artwork. Make sure you own every logo and graphic you send to the factory.
Then plan the branding pack. A leather jacket carries several brand touch points:
- Woven neck label and care label
- Hang tag
- Embossed or embroidered logo
- Zip pullers
- Poly bag, tissue and carton
Decide each one with the factory on a mock-up you approve before sampling. Changes after bulk starts are expensive.
Step 7: Sample, approve and place the first order
Never go into bulk on a design you have not worn.
- Sample. Time: 10–15 working days after you approve the artwork. Check fit on a person, leather feel, stitching, zip action, armour fit and branding placement.
- Revise. Expect at least one round of changes. Send notes with photos.
- Approve. Sign off the sample, size chart and branding in writing. This is what bulk is made against.
- First order. Our minimum is 1 piece, so you can start with a single product or a small test batch. Bulk production time depends on quantity and is confirmed with each quote.
- Quality. Agree what is checked during and after production, and ask for photos.
Make the most of the first batch by spreading it across a size run you can sell, rather than loading one size. Your factory can suggest a run once you say who you sell to.
Step 8: Plan where you sell and how you reorder
Pick one main channel for the first months. For most new motorcycle apparel brands that is their own store.
- Your own store (Shopify or a web shop). You own the customer list and the price. See how it works on our page for starting your own motorcycle gear brand on Shopify.
- Marketplaces (Amazon, eBay, Etsy). Each has its own rules for labelling, listings and who the maker is. Our seller hub links to the platform pages.
Whichever you choose, plan the reorder before the first order lands:
- Keep the approved pattern, size chart and artwork with the factory.
- Watch which sizes and colours sell, then reorder those. Reorder timing is confirmed when you place the order.
- Judge the launch by repeat customers and reviews, not just first sales.
Drop shipping can bridge the gap if you do not want to hold stock while you learn what sells.
Common mistakes to avoid
- Starting with a full collection instead of two or three products
- Skipping the sample, or approving it from photos
- Claiming protection you cannot document
- Changing the size chart between the first order and the reorder
- Picking a factory style other brands also sell, then wondering why you look the same
- Ordering labels before checking the trademark
Frequently asked questions
How much does it cost to start a motorcycle clothing brand?
It depends on the range, the leather and the order size, so no single figure is honest. The main costs are samples, the first production batch, labels and packaging, photography and a store. A smaller first range keeps the total down. Ask the factory for a quote on your actual spec: our minimum order is 1 piece, so you can start with a single product.
Do I need my own factory to start a motorcycle apparel brand?
No. Most brands work with a specialist manufacturer that builds to their design or puts their label on an existing design. Your job is the brand, the brief and the customer.
What is the difference between OEM and private label?
With OEM, you give the factory your design and it builds to your specification. With private label, you pick a design the factory already makes and put your brand on it. Many brands start with private label and move to their own design as they grow. See OEM and private label.
Can I start without holding any stock?
Yes, through drop shipping: the factory ships each order straight to your customer. We drop ship to the USA, the UK, the EU and worldwide, and the cost is the product price plus the actual shipping.
Do I need CE or EN 17092 certification before I launch?
Only if you want to market the garment as protective gear or your market requires it. Check what your target market and marketplace ask for. Never state a rating without a test report for that garment.
How long does it take from idea to first stock?
Add up the sample time (10–15 working days after you approve the artwork), your revision rounds and the bulk time (confirmed with each quote), plus shipping to you.
Start your first run with a factory that does this every day
If you have a sketch, a target rider and a price in mind, we can tell you what is realistic. Tell us your platform, the product and the quantity you have in mind, and we reply within 24 hours with a quote and a suggested first range.
Forty Seven Industries
Forty Seven Industries is a specialized manufacturer of motorcycle leather gear for brands, OEM clients, clubs and teams, and online and marketplace sellers: your brand, our factory.
